Material for wire brush of pipe cleaning machine: brush wire material is copper plated steel wire, steel wire thickness is optional 0.2mm, 0.3mm, 0.5mm, etc., the manufacturing process is double steel belt inside welding brush, brush barrel, double steel belt brush roll. Brother brush according to a variety of pipeline to customize the corresponding diameter of wire brush, the maximum internal diameter of 1.35 meters (1.8 meters in diameter), is the brush base, "double steel belt inside the largest brush welding hole manufacturer.".
Characteristics of steel wire brush cleaning device:
1, the steel skeleton as the main body, with 1 supporting plates, 1 wire brushes, 2 sealing plates and 2 leather bowls. Good sealing and wear resistance. Easy to assemble, can replace the support plate, steel wire brush, straight and leather;
2, wire brush pipe cleaner can effectively remove the pipe scale, is not easy to plug in the pipeline;
3. The product can carry electronic tracking system according to the design requirements and monitor the running state of the pigging.
Function of pipe cleaner:
1, the front support plate and sealing plate and a separate sleeve, can play the pigging, drainage, water resistance, isolation effect;
2, the use of steel wire wheel brush, can be strong removal of pipe wall scaling;
3, the rear uses two leather bowls, can play the role of cleaning, support, sealing and so on;
4, pipeline cleaning, descaling, water removal, wax scraping, detection, sealing, water pressure test and fluid isolation;
The scope of pipeline pigging: all kinds of oil, gas, water and new pipeline.
Technical parameters of pipe cleaner:
Starting pressure: 0.2Mpa
Withstand voltage: 10Mpa
Impact resistance: 75g
Tensile strength: 6800Psi
Tensile strength: 42Mpa
Tensile rate: 460%
Wear resistance: 2mm/100KM
One operation distance: 100KM-300KM
Operating temperature: -30 C -100 C
The function of steel wire brush cleaning device:
Natural gas pipeline 1. operations: clear the pipeline internal water, light oil, methane hydrate, ferric oxide, carbide dust, carbon disulfide and hydrogen sulfate and other corrosive substances; reduce the corrosion damage of corrosive substances on the inner wall of the pipe; to clear the pipeline to inspect pipe deformation; check valve; intact rate along; decrease working backpressure.
2. line: operation in Central China pipeline detection before the tube, low throughput intermittent operation of oil pipeline; pipeline internal clearance of condensate oil, wax and scaling, to reduce backpressure and wear resistance, reduce the temperature of the oil.
3. chemical materials and edible oil pipe line: cleaning with polymerization material pipeline; isolation of different pipe transport medium to achieve single pipe multi product delivery, metering pipe transport medium.
Pigging of new pipeline:
4. pigging pigging test pressure: remove pipeline sundries, floating rust, drainage, exhaust.
5. general pigging test: detection of pipeline deformation, construction quality. Before water pressure test, exhaust, pre production drainage, drying, dielectric isolation.
6. water conveyance and water injection pipeline: remove scale and sediment.
